This lightweight chair is ideal for remote camping, backcountry excursions, fishing trips, early-morning tailgates, and cheering from the sidelines.

This is our lightest, most compact chair. It’s ideal for tough terrain and remote destinations.

No, but it is compatible with the YETI® Chair Cup Holder if you need a place to put your drink.

No, the Trailhead® Field Chair is made with lightweight Twilite Fabric, while the Trailhead® Camp Chair features ultra-supportive FlexGrid™ Fabric. Both materials are seriously strong and UV resistant.

The fabric is ultra durable, but not immune to punctures. Luckily, if something punctures the fabric, it can be replaced. 

No, the chair is not fire resistant, so keep those campfire flames at bay.

The chair’s Twilite Fabric will be available as a replacement part, but it won’t be available for purchase. The new fabric will come with installation instructions. 

No, simply fold up the chair and pack it in the included carry bag.

The chair is easy to use and can be opened with one hand, but closing needs two.

It does not come with a cup holder, but it’s compatible with the YETI® Chair Cup Holder which can be attached to either side of the chair.

The cup holder can fit all Rambler® Tumblers, Travel Mugs, and Stackable Cups, Rambler® Bottles up to the 26 oz. size, all Colster® Can Insulators, and Yonder® Water Bottles up to the 34 oz. size.

Opened, the chair is 30” (76.2 cm) high, 28” (71.1 cm) deep, and 21” (53.3 cm) wide. When folded up, it’s 37” (93.9 cm) high, 3.6” (9.1 cm) deep, and 7” (17.8 cm) wide.

The seat is 17.5” (44.5 cm) above the ground.

The Twilite Fabric is UV resistant and designed for outdoor use. It’s not immune to fading, but it has been over engineered to minimize any color loss. 

Yes, easily throw the chair over your shoulder or across your body with the one-strap carry bag.

Find it behind the back joint stamped with the YETI® logo.

The Hondo® Beach Chair was designed to turn any terrain into the perfect lounging spot. Take it to the beach, the lawn, the tailgate, and beyond.

The Hondo® Beach Chair uses locking armrest controls to shift between four reclining positions. To activate, simply sit up to remove pressure from the backrest, lift armrests up to unlock, then pull the armrests back to recline. To lock into place, push the armrests down.

WIDTH: 26.5” (67.3 CM)

HEIGHT: 30.5” (77.5 CM)

DEPTH: 29.4” (74.7 CM)

For easy cleaning, simply hose it down with water. For stubborn grime on the frame or fabric, scrub with a simple mixture of mild soap and water using a soft bristle brush. We recommend hosing down your chair after use at the beach to remove salt and sand.

The YETI™ Chair Cup Holder is large enough to accommodate most vessels, including our Rambler® Wine Tumbler, Rambler® 26 oz. Water Bottle, or Rambler® 35 oz. Straw Mug.

No. Extremely sharp objects will puncture the fabric, but due to the weave, only large tears or cuts will affect the stability of the mesh. Should that happen, we offer service kits to help with repairs.

Flame Retardants have not been added to the chair, as most flame retardants are considered harmful to humans and known to cause cancer, reproductive harm or birth defects. Similar to other textiles, if an ember falls on the chair it may incur damage to the material. However, if damage does occur, we offer seat & back service kits to help with repairs.

Very minimal. Some amount of fading should be expected, but we use the highest-quality materials and UV-resistant additives to ensure the best possible performance. To keep this chair protected long-term, store it in the Hondo® Carry Tote.

The Hondo® Beach Chair warranty covers all manufacturer defects for the 5-year period. See YETI® Warranty for specific details.

The Hondo® Beach chair has been optimized for lounging with four reclining stages and a lower height to allow for stretching out. The Beach Chair is also our lightest chair yet with an included carrying strap to make it easier to carry across unforgiving terrains such as sand.

The mesh is made from FlexGrid™ Fabric, which can support up to 350 LBS (159 KG) of weight.

The Hondo® Beach Chair adjusts to four reclined positions, including 100°, 110°, 120°, and 130°. 

The Beach Chair comes with a shoulder strap for easy carrying. The Beach Chair Backstraps are also available as an accessory to allow for carrying the  chair on your back.

No. The Hondo® Beach Chair does not come with a carrying bag. However, the Hondo® Carry Tote is compatible with the chair and can be purchased separately for a more streamlined carry.

The Beach Chair armrests are made of Nylon.

The serialization label is located under the right armrest.

There is a tab under one armrest that can be used to keep the chair closed for easier carrying.

No. The Beach Chair Backstraps are made specifically for the Hondo® Beach Chair, and are not compatible with other YETI® products.

Directions for attaching the Backstrap accessory are on product packaging. Watch the below video for more.

You can take the Hondo® Base Camp Chair wherever you want to create your own Base Camp, whether it's in the stadium parking lot, in the backwoods, or on the beach.

Folded (LxWxH):

• 7 1/8"
• 26 1/2"
• 32 1/4"

Unfolded (LxWxH):

• 30 1/8"
• 26 1/2"
• 35"

The chair is warranted to support up to 500 lbs.

For easy cleaning, simply hose it down with water. For stubborn grime on the frame or fabric, scrub with a simple mixture of mild soap and water using a soft bristle brush.

The YETI™ Chair Cup Holder is large enough to accommodate most vessels, including our Rambler® Wine Tumbler, Rambler® 26 oz. Water Bottle, or Rambler® 35 oz. Straw Mug.

No. Extremely sharp objects will puncture the fabric, but due to the weave, only large tears or cuts will affect the stability of the mesh. Should that happen, we offer service kits to help with repairs.

Flame Retardants have not been added to the chair, as most flame retardants are considered harmful to humans and known to cause cancer, reproductive harm or birth defects. Similar to other textiles, if an ember falls on the chair it may incur damage to the material. However, if damage does occur, we offer seat & back service kits to help with repairs.

Very minimal. Some amount of fading should be expected, but we use the highest-quality materials and UV-resistant additives to ensure the best possible performance. To keep this chair protected long-term, store it in the Hondo® Carry Tote.

The Hondo® Base Camp Chair warranty covers all manufacturer defects for the 5-year period. See YETI® Warranty for specific details.

The serialization label is located under the right armrest.

You can take the Trailhead® Camp Chair wherever you want to create your own Base Camp, whether it's in the stadium parking lot, in the backwoods, or on the beach.

Folded (H x W x D):

• 43.0"
• 9.0"
• 11.75"

Unfolded (H x W x D):

• 36.25"
• 25.13"
• 29.9"

The chair is tested to support up to 500 lbs.

For easy cleaning, simply hose it down with water. For stubborn grime on the frame or fabric, scrub with a simple mixture of mild soap and water using a soft bristle brush.

No. Extremely sharp objects will puncture the fabric, but due to the weave, only large tears or cuts will affect the stability of the mesh. Should that happen, we offer service kits to help with repairs.

Flame Retardants have not been added to the chair, as most flame retardants are considered harmful to humans and known to cause cancer, reproductive harm or birth defects. Similar to other textiles, if an ember falls on the chair it may incur damage to the material. However, if damage does occur, we offer seat & back service kits to help with repairs.

Very minimal. Some amount of fading should be expected, but we use the highest-quality materials and UV-resistant additives to ensure the best possible performance.

The YETI™ Chair Cup Holder is large enough to accommodate most vessels, including our Rambler® Wine Tumbler, Rambler® 26 oz. Water Bottle, or Rambler® 35 oz. Straw Mug.

Push down on both armrests until you hear them click into place. Then push down on the back tensioner (on the back of the chair) until the FlexGrid™ Fabric is fully taut.

Underneath both arm rests there are release buttons. Push both to unlock the front tensioners. Then pull up on the back tensioner (on the back of the chair) to fold up the chair and store it in the carry bag.

The Trailhead® Camp Chair warranty covers all manufacturer defects for the 5-year period. See YETI® Warranty for specific details.

The serialization label is located under the right armrest.